1. Therefore, the new auto repair factory must obtain the environmental assessment and approval procedures, and carry out VOCS management to ensure that pollutants meet the standard discharge. At the same time, hazardous waste such as waste oil generated in the production process should be included in the standardized management of hazardous waste.
2. If the business area is less than 1,000 square meters, there is no need for environmental assessment. You only need to fill in the environmental assessment registration form at the local environmental protection bureau.
3. Hello, this depends on the scale and business type of your auto repair shop. Because the scale and type of business directly affect the type of pollutant emissions and the degree of impact on the surrounding environment.
4. It is stipulated that if the business area of automobile and motorcycle maintenance places is 5,000 square meters or more; it involves environmentally sensitive areas. It is necessary to prepare an environmental impact assessment report.If this condition is not met, it is enough to fill in a registration form at the Environmental Protection Bureau, that is, there is no need to do environmental assessment.
5. If the business area is less than 1,000 square meters, there is no need for environmental assessment. You only need to fill in the environmental assessment registration form at the local environmental protection bureau.
Go to the Bureau of Industry and Commerce to check the name first.Then take the checked name list and go to the Traffic Management Bureau to apply for a car repair permit. Then go to the environmental protection department to do environmental protection evaluation. After applying for the license, get the environmental protection evaluation report and then accept the qualification. Finally, go to the Industrial and Commercial Office to apply for an industrial and commercial business license.
The specific procedures for the third type of auto repair factory are: Method 1: Submit a written application to the local area. The Automobile Maintenance Management Office of the County Transportation Bureau (referred to as the Auto Repair Office), the Auto Repair Office will submit a complete set of formal declaration materials to the applicant.
Therefore, the new auto repair factory must obtain the environmental assessment and approval procedures, and carry out VOCS management to ensure that pollutants meet the standard discharge. At the same time, hazardous waste such as waste engine oil generated in the production process should be included in the standardized management of hazardous waste.
Go to the industrial and commercial department to apply for the Name Pre-Approval Notice, that is, to determine the name of your repair shop.
1. The operation of the repair shop will pollute the environment, mainly including wastewater, exhaust gas and noise, but the amount of pollution is relatively small. The environmental assessment only needs to make an environmental impact report form. If you have any questions, you can consult an environmental consultant.
2. The auto repair factory needs to apply for the environmental assessment registration form for the record. The auto repair industry is a key industry for the emission of volatile organic compounds VOCS. VOCS is an important precursor that causes ozone pollution, which has an important impact on the generation of secondary PM5 and is an important factor affecting atmospheric quality.
3. In fact, environmental assessment is not only the business owner's business, but also the responsibility of the "encyclical assessor". The ideal and institutional environmental assessment process and the relationship between enterprises are as follows: on-site survey,Process understanding, current situation monitoring, comprehensive analysis, impact prediction, and then conclusion suggestions, clear thinking, strong professionalism, and the enterprise cooperates with them and respects them.
4. Legal analysis: Environmental assessment is the abbreviation of environmental impact assessment. Simply put, it is just an environmental protection procedure. After the environmental assessment, there is also an acceptance test to apply for a pollution discharge permit. They are all kinds of environmental protection procedures.
5. What is environmental assessment? Environmental assessment is the abbreviation of environmental impact assessment, which is the abbreviation of environmental impact assessment of construction projects. It refers to the analysis, prediction and evaluation of the environmental impact that may be caused by the implementation of planning and construction projects, and the proposal of countermeasures and measures to prevent or mitigate adverse effects. Methods and systems of tracking and monitoring.
6. Environmental impact assessment is a process, this kind ofThe process focuses on the prevention function of environmental impact assessment before the start of decision-making and development and construction activities.
1. Yes, we need to make an environmental assessment report. Strictly speaking, if the charging facilities of new energy vehicles form a scale, their charging facilities belong to the transmission (transmit) transformation project.
2. If necessary, you must go through the environmental assessment procedures, because the Environmental Assessment Law stipulates that if the enterprise's production scale, production process and production location change, the environmental assessment documents must be re-approved.
3. This will also promote the large-scale production and promotion of new energy vehicles and accelerate the pace of replacing fuel vehicles.The third aspect: to build more perfect charging facilities and energy storage systems. Energy transformation must have sufficient supporting facilities, and the new policy of oil to gas in 2023 has also introduced corresponding measures.
4. There is no need to redo it. Environmental evaluation is for construction projects. Simple enterprise name change does not require a re-evaluation. The original environmental assessment report can continue to be used.
5. No, traditional car enterprises already have complete vehicle production qualifications. According to relevant regulations, only enterprises that have established new energy project companies separately need to apply for additional qualifications, such as BAIC New Energy and Chery New Energy.
6. Because the technical reserve requirements of new energy vehicles are relatively high, and the access threshold is higher than that of traditional fuel vehicles, for some car companies, if you start from the beginningThe research and development of new energy vehicles will be far behind that of other automobile enterprises, but if the transformation is based on the original production platform, it will save a lot of capital investment and research and development cycle time.
1. Entrust a qualified environmental assessment company. You can go to the environmental assessment company with the project documents of the Development and Reform Commission (or the notice of permission to carry out preliminary work) and the researchable report, and the environmental assessment company will send people to your processing site for on-site survey. The environmental assessment company prepares the environmental assessment report.
2. The process of the environmental assessment report is as follows: the applicant applies to the window of the Environmental Protection Bureau of the Municipal Administrative Service Center and submits the application materials. The receiving personnel shall verify the application materials and make an acceptance decision on the spot.If the applicant's materials do not meet the requirements but can be corrected on the spot, they shall be returned and corrected on the spot and accepted.
3. Go to the Management Section of the Environmental Protection Bureau and collect the Construction Project Environmental Protection Approval Consultation Form. Submit the declaration materials to the Management Section of the Environmental Protection Bureau: two copies of the "Proposed Project Environmental Protection Approval Consultation Form", a copy of the name approval notice, the proposed location of the construction project, the geographical map of the surrounding situation and a copy of the housing lease contract.
4. The environmental assessment procedures of the third type of auto repair shop are as follows: submit a written application to the local area.
5. Whether to do an environmental assessment mainly depends on the business area of the auto repair shop or auto repair shop and "whether there is spray paint". If less than 1,000 square meters refers to the business area, there is no need to do environmental assessment, but the exhaust gas treatment equipment should be done well.
6. Go to the Management Section of the Environmental Protection Bureau to receive the "Construction Project Environmental Protection Approval Consultation Form".
1. If the business area is less than 1,000 square meters, there is no need for environmental assessment. You only need to fill in the environmental assessment registration form at the local environmental protection bureau.
2. Hello, this depends on the scale and business type of your auto repair shop. Because the scale and type of business directly affect the type of pollutant emissions and the degree of impact on the surrounding environment.
3. Environmental assessment is required to apply for an automobile maintenance business license. According to the provisions of the new "Classification and Management List of Environmental Impact Evaluation of Construction Projects" implemented from June 1, 2015, if the business area is 1,000 square meters or more, and those involving environmentally sensitive areas need to conduct an environmental assessment, an environmental assessment report shall be prepared.
Cleaning agents HS code classification-APP, download it now, new users will receive a novice gift pack.
1. Therefore, the new auto repair factory must obtain the environmental assessment and approval procedures, and carry out VOCS management to ensure that pollutants meet the standard discharge. At the same time, hazardous waste such as waste oil generated in the production process should be included in the standardized management of hazardous waste.
2. If the business area is less than 1,000 square meters, there is no need for environmental assessment. You only need to fill in the environmental assessment registration form at the local environmental protection bureau.
3. Hello, this depends on the scale and business type of your auto repair shop. Because the scale and type of business directly affect the type of pollutant emissions and the degree of impact on the surrounding environment.
4. It is stipulated that if the business area of automobile and motorcycle maintenance places is 5,000 square meters or more; it involves environmentally sensitive areas. It is necessary to prepare an environmental impact assessment report.If this condition is not met, it is enough to fill in a registration form at the Environmental Protection Bureau, that is, there is no need to do environmental assessment.
5. If the business area is less than 1,000 square meters, there is no need for environmental assessment. You only need to fill in the environmental assessment registration form at the local environmental protection bureau.
Go to the Bureau of Industry and Commerce to check the name first.Then take the checked name list and go to the Traffic Management Bureau to apply for a car repair permit. Then go to the environmental protection department to do environmental protection evaluation. After applying for the license, get the environmental protection evaluation report and then accept the qualification. Finally, go to the Industrial and Commercial Office to apply for an industrial and commercial business license.
The specific procedures for the third type of auto repair factory are: Method 1: Submit a written application to the local area. The Automobile Maintenance Management Office of the County Transportation Bureau (referred to as the Auto Repair Office), the Auto Repair Office will submit a complete set of formal declaration materials to the applicant.
Therefore, the new auto repair factory must obtain the environmental assessment and approval procedures, and carry out VOCS management to ensure that pollutants meet the standard discharge. At the same time, hazardous waste such as waste engine oil generated in the production process should be included in the standardized management of hazardous waste.
Go to the industrial and commercial department to apply for the Name Pre-Approval Notice, that is, to determine the name of your repair shop.
1. The operation of the repair shop will pollute the environment, mainly including wastewater, exhaust gas and noise, but the amount of pollution is relatively small. The environmental assessment only needs to make an environmental impact report form. If you have any questions, you can consult an environmental consultant.
2. The auto repair factory needs to apply for the environmental assessment registration form for the record. The auto repair industry is a key industry for the emission of volatile organic compounds VOCS. VOCS is an important precursor that causes ozone pollution, which has an important impact on the generation of secondary PM5 and is an important factor affecting atmospheric quality.
3. In fact, environmental assessment is not only the business owner's business, but also the responsibility of the "encyclical assessor". The ideal and institutional environmental assessment process and the relationship between enterprises are as follows: on-site survey,Process understanding, current situation monitoring, comprehensive analysis, impact prediction, and then conclusion suggestions, clear thinking, strong professionalism, and the enterprise cooperates with them and respects them.
4. Legal analysis: Environmental assessment is the abbreviation of environmental impact assessment. Simply put, it is just an environmental protection procedure. After the environmental assessment, there is also an acceptance test to apply for a pollution discharge permit. They are all kinds of environmental protection procedures.
5. What is environmental assessment? Environmental assessment is the abbreviation of environmental impact assessment, which is the abbreviation of environmental impact assessment of construction projects. It refers to the analysis, prediction and evaluation of the environmental impact that may be caused by the implementation of planning and construction projects, and the proposal of countermeasures and measures to prevent or mitigate adverse effects. Methods and systems of tracking and monitoring.
6. Environmental impact assessment is a process, this kind ofThe process focuses on the prevention function of environmental impact assessment before the start of decision-making and development and construction activities.
1. Yes, we need to make an environmental assessment report. Strictly speaking, if the charging facilities of new energy vehicles form a scale, their charging facilities belong to the transmission (transmit) transformation project.
2. If necessary, you must go through the environmental assessment procedures, because the Environmental Assessment Law stipulates that if the enterprise's production scale, production process and production location change, the environmental assessment documents must be re-approved.
3. This will also promote the large-scale production and promotion of new energy vehicles and accelerate the pace of replacing fuel vehicles.The third aspect: to build more perfect charging facilities and energy storage systems. Energy transformation must have sufficient supporting facilities, and the new policy of oil to gas in 2023 has also introduced corresponding measures.
4. There is no need to redo it. Environmental evaluation is for construction projects. Simple enterprise name change does not require a re-evaluation. The original environmental assessment report can continue to be used.
5. No, traditional car enterprises already have complete vehicle production qualifications. According to relevant regulations, only enterprises that have established new energy project companies separately need to apply for additional qualifications, such as BAIC New Energy and Chery New Energy.
6. Because the technical reserve requirements of new energy vehicles are relatively high, and the access threshold is higher than that of traditional fuel vehicles, for some car companies, if you start from the beginningThe research and development of new energy vehicles will be far behind that of other automobile enterprises, but if the transformation is based on the original production platform, it will save a lot of capital investment and research and development cycle time.
1. Entrust a qualified environmental assessment company. You can go to the environmental assessment company with the project documents of the Development and Reform Commission (or the notice of permission to carry out preliminary work) and the researchable report, and the environmental assessment company will send people to your processing site for on-site survey. The environmental assessment company prepares the environmental assessment report.
2. The process of the environmental assessment report is as follows: the applicant applies to the window of the Environmental Protection Bureau of the Municipal Administrative Service Center and submits the application materials. The receiving personnel shall verify the application materials and make an acceptance decision on the spot.If the applicant's materials do not meet the requirements but can be corrected on the spot, they shall be returned and corrected on the spot and accepted.
3. Go to the Management Section of the Environmental Protection Bureau and collect the Construction Project Environmental Protection Approval Consultation Form. Submit the declaration materials to the Management Section of the Environmental Protection Bureau: two copies of the "Proposed Project Environmental Protection Approval Consultation Form", a copy of the name approval notice, the proposed location of the construction project, the geographical map of the surrounding situation and a copy of the housing lease contract.
4. The environmental assessment procedures of the third type of auto repair shop are as follows: submit a written application to the local area.
5. Whether to do an environmental assessment mainly depends on the business area of the auto repair shop or auto repair shop and "whether there is spray paint". If less than 1,000 square meters refers to the business area, there is no need to do environmental assessment, but the exhaust gas treatment equipment should be done well.
6. Go to the Management Section of the Environmental Protection Bureau to receive the "Construction Project Environmental Protection Approval Consultation Form".
1. If the business area is less than 1,000 square meters, there is no need for environmental assessment. You only need to fill in the environmental assessment registration form at the local environmental protection bureau.
2. Hello, this depends on the scale and business type of your auto repair shop. Because the scale and type of business directly affect the type of pollutant emissions and the degree of impact on the surrounding environment.
3. Environmental assessment is required to apply for an automobile maintenance business license. According to the provisions of the new "Classification and Management List of Environmental Impact Evaluation of Construction Projects" implemented from June 1, 2015, if the business area is 1,000 square meters or more, and those involving environmentally sensitive areas need to conduct an environmental assessment, an environmental assessment report shall be prepared.
Global trade compliance playbooks
author: 2024-12-23 21:46How to identify emerging supply hubsHolistic trade environment mapping
author: 2024-12-23 20:38High-value electronics HS code checks
author: 2024-12-23 20:35HS code-based scenario planning for exports
author: 2024-12-23 22:39How to identify export-ready products
author: 2024-12-23 22:33HS code-based forecasting for raw materials
author: 2024-12-23 21:23Trade data for renewable energy sector
author: 2024-12-23 21:08How to manage port congestion data
author: 2024-12-23 20:38449.94MB
Check589.53MB
Check234.14MB
Check767.33MB
Check233.28MB
Check384.93MB
Check962.65MB
Check955.62MB
Check118.21MB
Check175.95MB
Check188.49MB
Check993.49MB
Check721.14MB
Check259.81MB
Check626.32MB
Check256.47MB
Check823.25MB
Check395.74MB
Check699.71MB
Check289.53MB
Check638.97MB
Check327.86MB
Check272.53MB
Check491.65MB
Check376.86MB
Check969.75MB
Check135.29MB
Check756.55MB
Check594.34MB
Check849.78MB
Check771.22MB
Check676.96MB
Check981.61MB
Check257.67MB
Check185.38MB
Check453.84MB
CheckScan to install
Cleaning agents HS code classification to discover more
Netizen comments More
1581 HS code impact on trade finance
2024-12-23 22:31 recommend
54 Enhanced supplier vetting processes
2024-12-23 21:44 recommend
2222 HS code-based reclassification services
2024-12-23 20:31 recommend
2387 Country-specific HS code conversion charts
2024-12-23 20:16 recommend
2909 How to reduce transit time variability
2024-12-23 20:10 recommend