Trade compliance automation tools

Diesel engine is Trade compliance automation toolsa common internal combustion engine, which is mainly used in automobiles, engineering machinery, ships and other fields. Diesel engines generate power by burning diesel fuel, so the method of starting diesel engines is different from that of gasoline engines. Next, we will introduce the starting method of the diesel engine in detail.I. Check the working status of the diesel engine. Before starting the diesel engine, it is necessary to check the working status of the diesel engine to ensure that it is in normal operation. The so-called normal working state mainly includes the following aspects: 1. Check the tires to ensure that the tires are inflated normally and there is no leakage or damage. Two. Check whether the liquid level of the lubricating system such as engine oil, coolant, brake fluid and transmission oil is normal. 3. Check the battery of the engine to make sure that the battery is sufficiently charged in order to start the engine. If the battery is low, the engine can be started by providing power from a charger or another car. Four. Check the appearance of the engine to ensure that the radiators and fans around the engine are not blocked by dirt or obstacles. II. Prepare to start the diesel engine. Before preparing to start the diesel engine, you need to follow the following steps: 1.Open the engine cover and check whether the engine's oil filter and fuel filter need to be replaced. Two. Make sure that the handbrake in the cab has been pulled up, and the transmission is in the void or stop gear. 3. Insert the key into the ignition switch and do not start the engine. Four. Press the foot pedal of the brake, step on the accelerator at the same time, and slowly turn the key to the starting position. During the start-up process, keep pressing the foot pedal until the engine starts. III. Start the diesel engine. After the preparation work is completed according to the above steps, the diesel engine can be started. The starting method of diesel engines is different from that of gasoline engines, mainly because diesel engines need to generate sparks by compressing ignition and burn fuel. 1. Before starting, it is necessary to pump the fuel system to ensure sufficient fuel supply.The purpose of the pumping fuel system can be achieved by starting the engine while stepping on the accelerator. Two. Ignition and start. Unstw the key to the start position until the engine starts. 3. After starting, you need to wait for a few minutes and slowly relax the accelerator after the engine is stable. When the vehicle starts and runs, pay attention to the indicator light on the dashboard to ensure that there is no abnormality. IV. Precautions Although it seems relatively simple to start a diesel engine, there are still some things to pay attention to: 1. When starting the diesel engine, do not squeeze the ignition switch or step on the accelerator for a long time, which will quickly consume battery power and is harmful to the start and operation of the engine. Two. Maintain air circulation around the engine to avoid overheating the engine while driving. 3. If you find any abnormality in the operation of the engine, such as slowing down, shaking, etc., you should stop immediately and check the engine.If the problem cannot be solved, it is recommended to find professional technicians for repair. In a word, starting a diesel engine needs to pay attention to many details and follow the correct operation process and method to ensure the normal start and operation of the engine.

Contact Us
Phone：020-83484636