1. The steps for making cars by hand are as follows: Let me teach you how to turn waste into treasure and use waste teeth In fact, the method of making a car by hand in a paste box is very simple. Prepare materials: toothpaste box, four bottle caps, rubber clay, double-sided glue, straw.
2. Handmade smallHow to make a car: Use a ruler and a knife to cut the toothpaste box into two pieces, one end into a carriage, and the other end into a car head, with a ratio of 3:1. Draw the oblique line on the front of the car with a pen and ruler, and then cut it with a knife.
3. The first step is to prepare the necessary equipment. Step two, cut the toothpaste box into the picture. Step three. Use double-sided adhesive to fix it. The fixed appearance is as shown in the figure. Step 4. Use excess pieces of paper to make the head and tail of the car.
4. Then glue the front face of the prepared car to the end of the toilet paper tube with glue, and trim the uneven part with scissors. Then glue the car seat, steering wheel and front wheel with glue. The last step is to stick the rear wheel, and our handmade car is completed. About handmade: turn waste into treasure, handmade.
5. Leave one side of the narrow edge of the carton, and then seal it with wide tape. Cut open about two-thirds of the sealing surface and turn out a piece of cardboard. Then fold the two pieces of cardboard in bal. Make the wheels and steering wheels of the car with disposable lunch boxes. Remember to color them first. Make the eyes and mouth of the car with white card paper.
1. The carton making tutorial is as follows: Prepare the necessary materials: toothpaste box, four small bottle caps, double-sided glue, scissors, rubber clay, straw. Cut the toothpaste box according to the picture below, and pay attention to the same size on the left and right sides.
2. Prepare the required materials. Cut off one side of the toothpaste box,Cut out a triangular notch in the toothpaste box as shown in the picture below (as shown in the figure), and note that the left and right sides should be the same size. Stick the edge of the upper piece with double-sided adhesive, fold it down, and stick it tightly.
3. First, seal the carton with wide tape, and then cut it at two-thirds of the seal. Turn out a piece of cardboard as the windshield of the car. Make 4 wheels out of paper and fix them on both sides of the carton. After fixing the number wheel, just color the body of the car.
4. Flatten the cardboard box and cut it out according to the shape proportion shown in the figure. Stick the parts well. This is the main body of the car. Color drawing, decoration, headlights and windows are all complete. To make a wheel, the wheel rim is black, black tape or painting is also fe, in short, it should be realistic.
5. Use cardboard boxes to make cars. First, prepare cardboard boxes, scissors, colored pencils, glue sticks and white paper.02 First, use scissors to cut out the piece of the cardboard box that needs to be made into a car. 03 Use scissors to cut off a small triangle on each side of the opening of the carton.
6. The tutorial of making a small car with a handmade carton is as follows: to make a small car with a cardboard box, first prepare the cardboard box, scissors, colored pencils, glue sticks and white paper. First, cut out the cardboard box with scissors that needs to be made into a car. Use scissors to cut off a small triangle on each side of the opening of the carton.
Use a ruler and a knife to cut the toothpaste box into two pieces, one end into a carriage and the other end into the front of the car, with a ratio of 3:1. Draw the oblique line on the front of the car with a pen and ruler, and then cut it with a knife. Fold it and stick it with double-sided adhesive and transparent adhesive, so that the front of the car will come out.
First of all, prepare the materials and tools for making toy cars: a pair of scissors, a piece of colored paper, a roll of paper tube, and glue or double-sided adhesive. In addition, four bottle caps of beverage bottles are needed. Bottle caps can be of different colors, but the size must be the same, otherwise the toy car is easy to overturn.
First, cut the cardboard box into the body of the car, as shown in the figure. Then stick the colored paper on the carton and wrap the car, as shown in the figure. Take out another piece of colored paper and roll it into a cylindrical shape, as shown in the figure. Cut the cylindrical colored paper into wheels, and then put it on with a toothpick, as shown in the figure.
The simple way to make a car by hand is as follows: material preparation: colored paper, paper tube (after the toilet paper is used up), 4 mineral water bottle caps, wooden sticks (remove the cotton swab head), double-sided adhesive, hot melt glue gun, scissors, etc.
international trade insights-APP, download it now, new users will receive a novice gift pack.
1. The steps for making cars by hand are as follows: Let me teach you how to turn waste into treasure and use waste teeth In fact, the method of making a car by hand in a paste box is very simple. Prepare materials: toothpaste box, four bottle caps, rubber clay, double-sided glue, straw.
2. Handmade smallHow to make a car: Use a ruler and a knife to cut the toothpaste box into two pieces, one end into a carriage, and the other end into a car head, with a ratio of 3:1. Draw the oblique line on the front of the car with a pen and ruler, and then cut it with a knife.
3. The first step is to prepare the necessary equipment. Step two, cut the toothpaste box into the picture. Step three. Use double-sided adhesive to fix it. The fixed appearance is as shown in the figure. Step 4. Use excess pieces of paper to make the head and tail of the car.
4. Then glue the front face of the prepared car to the end of the toilet paper tube with glue, and trim the uneven part with scissors. Then glue the car seat, steering wheel and front wheel with glue. The last step is to stick the rear wheel, and our handmade car is completed. About handmade: turn waste into treasure, handmade.
5. Leave one side of the narrow edge of the carton, and then seal it with wide tape. Cut open about two-thirds of the sealing surface and turn out a piece of cardboard. Then fold the two pieces of cardboard in bal. Make the wheels and steering wheels of the car with disposable lunch boxes. Remember to color them first. Make the eyes and mouth of the car with white card paper.
1. The carton making tutorial is as follows: Prepare the necessary materials: toothpaste box, four small bottle caps, double-sided glue, scissors, rubber clay, straw. Cut the toothpaste box according to the picture below, and pay attention to the same size on the left and right sides.
2. Prepare the required materials. Cut off one side of the toothpaste box,Cut out a triangular notch in the toothpaste box as shown in the picture below (as shown in the figure), and note that the left and right sides should be the same size. Stick the edge of the upper piece with double-sided adhesive, fold it down, and stick it tightly.
3. First, seal the carton with wide tape, and then cut it at two-thirds of the seal. Turn out a piece of cardboard as the windshield of the car. Make 4 wheels out of paper and fix them on both sides of the carton. After fixing the number wheel, just color the body of the car.
4. Flatten the cardboard box and cut it out according to the shape proportion shown in the figure. Stick the parts well. This is the main body of the car. Color drawing, decoration, headlights and windows are all complete. To make a wheel, the wheel rim is black, black tape or painting is also fe, in short, it should be realistic.
5. Use cardboard boxes to make cars. First, prepare cardboard boxes, scissors, colored pencils, glue sticks and white paper.02 First, use scissors to cut out the piece of the cardboard box that needs to be made into a car. 03 Use scissors to cut off a small triangle on each side of the opening of the carton.
6. The tutorial of making a small car with a handmade carton is as follows: to make a small car with a cardboard box, first prepare the cardboard box, scissors, colored pencils, glue sticks and white paper. First, cut out the cardboard box with scissors that needs to be made into a car. Use scissors to cut off a small triangle on each side of the opening of the carton.
Use a ruler and a knife to cut the toothpaste box into two pieces, one end into a carriage and the other end into the front of the car, with a ratio of 3:1. Draw the oblique line on the front of the car with a pen and ruler, and then cut it with a knife. Fold it and stick it with double-sided adhesive and transparent adhesive, so that the front of the car will come out.
First of all, prepare the materials and tools for making toy cars: a pair of scissors, a piece of colored paper, a roll of paper tube, and glue or double-sided adhesive. In addition, four bottle caps of beverage bottles are needed. Bottle caps can be of different colors, but the size must be the same, otherwise the toy car is easy to overturn.
First, cut the cardboard box into the body of the car, as shown in the figure. Then stick the colored paper on the carton and wrap the car, as shown in the figure. Take out another piece of colored paper and roll it into a cylindrical shape, as shown in the figure. Cut the cylindrical colored paper into wheels, and then put it on with a toothpick, as shown in the figure.
The simple way to make a car by hand is as follows: material preparation: colored paper, paper tube (after the toilet paper is used up), 4 mineral water bottle caps, wooden sticks (remove the cotton swab head), double-sided adhesive, hot melt glue gun, scissors, etc.
Real-time supplier performance scoring
author: 2024-12-23 21:17Trade data for industrial raw materials
author: 2024-12-23 21:11HS code compliance for Pacific Island nations
author: 2024-12-23 20:28Real-time customs data reports
author: 2024-12-23 20:27Supply chain sustainability metrics
author: 2024-12-23 19:59Country-of-origin rules by HS code
author: 2024-12-23 22:01Global trade compliance scorecards
author: 2024-12-23 21:33Global trade intelligence for investors
author: 2024-12-23 20:39How to leverage open-source trade data
author: 2024-12-23 20:31How to identify top export opportunities
author: 2024-12-23 20:12615.59MB
Check257.25MB
Check521.67MB
Check523.55MB
Check726.33MB
Check826.68MB
Check751.27MB
Check432.37MB
Check851.92MB
Check919.72MB
Check243.52MB
Check276.56MB
Check439.42MB
Check356.78MB
Check617.51MB
Check591.53MB
Check335.42MB
Check262.45MB
Check534.98MB
Check262.79MB
Check376.63MB
Check178.22MB
Check181.59MB
Check454.45MB
Check561.64MB
Check994.49MB
Check466.65MB
Check714.46MB
Check145.12MB
Check843.57MB
Check851.89MB
Check339.97MB
Check648.53MB
Check564.27MB
Check292.39MB
Check751.63MB
CheckScan to install
international trade insights to discover more
Netizen comments More
1616 Crafted wood products HS code references
2024-12-23 21:33 recommend
2670 importers and exporters
2024-12-23 20:43 recommend
2447 Agriculture import export insights
2024-12-23 20:19 recommend
2641 How to find emerging export markets
2024-12-23 20:16 recommend
178 International trade knowledge base
2024-12-23 19:52 recommend