Data-driven trade invoice verification

List of contents of this article:

• 1, Computer Reinstallation System Fault Solution
• 2, What to do if the system cannot be reinstalled after the computer is formatted
• 3
  、 What are the reasons for the failure of the computer to reinstall the system?

Computer Reinstall System Fault Solution

Check whether the installation CD is correct. Sometimes, the computer can't install the system because the installation CD is damaged or read incorrectly. At this time, we need to use other installation CDs to solve the problem. Check the BIOS settings.

Solution: You can check the information about the CMOS jumper in the motherboard manual and clear the CMOS, but it should be noted here: when clearing the CMOS settings, you must unplug the host power cord or set the switch of the host power supply to off or 0.

Solution: Damage the dominant partition, replace the hardware. The capacity of the C disk is insufficient, and the space is expanded.The mirror file is damaged and the download is heavy. When installing the system, check whether your computer can support the system.

What to do if the computer can't reinstall the system after formatting

Check whether the hard disk is damaged, if The hard disk is damaged. Please try to replace the new hard disk. If none of the above methods can solve the problem, it is recommended that you reinstall the operating system to solve the problem.

Install the system with a CD-ROM. Buy a system CD-ROM, then put the CD-ROM into the optical drive, restart the computer, and the system will be installed automatically.

- First, make sure you have a bootable operating system installation CD or a usable USB installation drive. - At the same time, you need to make sure that you have the correct operating system installation key, which is necessary during the installation process.

What should I do if I can't reinstall the system after the computer is formatted? It seems impossible to format the main logic partition of the system in the boot state with software. You may not have formatted the main logic partition, that is, the partition you install the system.

Generally, this kind of computer system disk is formatted and the reinstalled system cannot be installed normally. You can try these methods. YouYou can first take down your hard disk, such as memory and hardware data cable, and plug it in and unplug it, and then try it if it still doesn't work.

What are the reasons for the failure of the computer to reinstall the system?

1. First of all, determine the situation before the computer fails. If the computer crashes after moving, it may be that the computer is greatly shaken during the movement process, causing the internal parts of the computer to be loose and poor contact, resulting in a crash. Open the chassis and re-tighten the memory, graphics card and other devices.

2. Search for answers. I want to ask a question. Baidu knows the prompt message and knows that the baby can't find the question_! The problem may have been invalidated.

3. Reason 1: Hardware incompatibility Some old models of computer hardware may not be compatible with Windows 10 system.This may be because the hardware manufacturer does not provide drivers or firmware updates compatible with Windows 10.

4. It is the bad contact of the hard disk, or there is a problem with the partition. Next, let's learn about reinstalling the system: reinstalling the system refers to reinstalling the operating system of the computer.