Supplier compliance audit automation

List of the table of contents of this article:

• 1,Supplier compliance audit automationGeneral characteristics of the serial system
• 2, What is the difference between the cascade of the system and the series
• 3, How to calculate the two-system series system function
• 4, what Is it a series and parallel diagram

General characteristics of the series system

1. Current: In the series circuit, there is only one path to supply the current, so the current is continuous in the whole circuit. Voltage: In a series circuit, the voltage is added in the order of the power supply and each component. The voltage measured at any position is the sum of the voltages of all the components in front.

2. The characteristics of the series resonance system (BPXZ-HT) are stable and reliable.

3. Series characteristics: the current in each resistor is the same, the total voltage of the circuit is equal to the sum of the voltage on each resistor, the total resistance is equal to the sum of each resistor, and the distribution of the voltage on the series resistor is directly proportional to the resistance. Features of parallel connection: In a circuit with parallel resistance, multiple resistors are connected in parallel to form a total resistance.

4. The series hybrid power system is generally directly driven by the internal combustion engine to generate electricity. The generated electricity is transmitted to the battery through the control unit, and then transmitted from the battery to the motor into kinetic energy, and finally drives the car through the variable speed mechanism. Under this connection method, the battery is like a reservoir, but the object of regulation is not the amount of water, but electricity.

5. A series circuit is a continuous circuit, and the current can only flow along one path.Its features include: the current flows along each component in the series circuit, so the magnitude of the current in each component is equal, which conforms to the law of current conservation.

What is the difference between cascading and series of the system

The connection method is different: series connection is to connect circuit components (such as resistors, capacitors, inductors, electrical appliances, etc.) one by one. The current through each electrical appliance in the series circuit is equal. A parallel connection is a connection method that connects two components, devices of the same or different types, etc. at the same time.

The differences are as follows: the mechanism is different: tandem catalysis refers to the addition of multiple catalysts in a reactor in turn to promote the progress of chemical reactions; while cascading catalysis refers to a multi-step reaction in which different catalysts are specific to different reaction steps.

No, these are two concepts. Series connection is the original of two terminals, and casion is a two-port with four terminals. The applicable objects are different.

Pallel and series are two common connection methods in circuits, and they have obvious differences in terms of current flow and total resistance. Features of parallel connection. Parallel connection is to connect the components in the circuit to a node, and the two ends of each component are connected to each other.

The reliability of the parallel system is higher than that of the serial system. Reason: The serial system is a system in which the failure of any unit of all the units that make up the system will cause the failure of the whole system. The risk is higher, and if there is a problem, you need to check each unit one by one. A parallel system refers to a system that only fails when all the units that make up the system fail.

How to calculate the system function of two systems in series

You can set the signal of the node and then solve it separately. On the whole, the system function is 1 input and 1 output; the 2 subsystems are also one input and one output.

If it is a distribution function of two-dimensional random variables X and Y, then let F (X, Y) find the second-order partial derivative of x and y, and so on.

The current of the series circuit is equal everywhere: I total=I1=I2=I3=......=In. The total voltage of the series circuit is equal to the sum of the voltages in various places: U original=U1+U2+U3+......+Un. The voltage of each branch of the parallel circuit is equal and equal to the power supply voltage: U=U1=U2.

Take the z transformation on both sides: Y(z)=X(z)H(z) is defined as a system function.The system function H(z) must converge in the whole domain from the unit circle to ∞, that is, 1≤∣Z|≤∞, and all the poles of H(z) are within the unit circle. Therefore, all the poles of the system function of the causal stability system must be within the unit circle.

In fact, the total efficiency of the series system is the best calculation, which is the product of each level of efficiency. For example, the efficiency between the motor and the reducer is 0.9, the efficiency between the reducer and the output shaft is 0.9, and the efficiency of the output shaft for external work is 0.9, so the efficiency of the system is 0.9×0.9×0.9=0.729.

What is series and parallel illustration

Serial and parallel: Series and parallel is a connection method of a circuit. Series connection: series connectionIt is a circuit connection method in which each component in the circuit is connected by a wire in turn, or in which the components are directly connected in turn. Generally speaking, in series, the head and tail of the two originals are connected, and the current through the access circuit is the same.

The introduction of series and parallel diagrams is as follows: Series connection: a circuit connection method in which the components or components in the circuit are arranged so that the current passes through each component or component regardless of the series circuit flow. Serial connection of electrical appliances in series circuits is one of the basic ways to connect circuit components.

Palle circuit: A parallel circuit is one of the two basic ways to make the current have more than one mutually independent channel between the circuit components that make up the parallel circuit. Series and parallel circuit, the secret of the physical drawing method of the circuit: the first connection, the tail connection, the first in and the tail out.Definition: The electrical appliances are connected to the circuit in turn.

Serialization: Series refers to connecting two or more objects together to form a larger object or system. It can be used to describe circuits, mechanical systems or other similar systems. Parall: Parall refers to connecting multiple objects together to form a larger object or system.

Pallel connection: A parallel connection is a connection method between components. It is characterized by a connection method that connects two components of the same or different types, devices, etc., and the tail is also connected at the same time. It is usually used to refer to the connection method of electronic components in the circuit, that is, parallel circuits.