Check whether the power socket is charged first to ensure that the plug is in good contact. Question. If there is a problem with the control circuit or the compressor itself, it is recommended to ask professional maintenance personnel to check and repair. Science popularization of relevant knowledge: If the refrigerator compressor does not work, the ambient temperature may be too low.
/Suggested solution: If it is found that the components of the compressor have been burned after professional inspection, it is necessary to repair and replace the components in time after disassembling the refrigerator, so that the compressor can return to normal operation, so as to solve the problem of not starting after power-on.
In this case, you need to find a special person to be responsible. Damage to the components of the refrigerator will often cause the engine in the refrigerator to not work or other effects. This requires a special person to repair it to ensure that there is no problem with the components that the main work of the refrigerator. If there is a problem, you can replace or replace a new refrigerator.
1. It may be because the temperature of the refrigerator is too high. When the temperature of the refrigerator exceeds the set temperature, the spring sheet on the thermostat will automatically bounce up to form a loop. In this case, it will also make a noise. Unplug the power supply, wait for the temperature to drop, and then put it into use again.
2. When the refrigerator starts, there should be a sound when the temperature control switch jumps to the connected position. In addition, the sound will be slightly louder when the compressor starts, which is normal. Don't worry.
3. If there is a banging sound in the refrigerator, and the sound is made in the running electric refrigerator compressor, which is the sound made by the spring in the compressor being broken or displaced, it should be repaired in time.
4. Reason 1: The temperature in the refrigerator is too high, resulting in fluorine leakage in the refrigeration system, that is, the refrigerator is not cooling because there is no refrigerant.Solution: Find a repairman, re-weld the pipe, and take the time to re-add refrigerant. Reason 2: Frosting in the evaporator.
5. The floor of the refrigerator is not flat or the placement is unstable, which is a common reason for the noise of the refrigerator. The huge sound of "boom", "giggle" and "tata", accompanied by obvious vibrations. When this kind of sound appears, users should pay special attention and should immediately find after-sales service for door-to-door repair.
1. The reason why the refrigerator does not cool: If it is not cool, there may be a problem with the refrigerator compressor. The compressor can start. When removing the return pipe and blocking the outlet with your finger, check how high the pressure is. If it is too low, then there is a problem with the compressor. The compressor cannot start. Check whether the refrigerator power supply is plugged in.
2. If the compressor can start normally, it is necessary to consider whether the refrigerant has been used up or the refrigerant has been leaked. It may be that the exhaust pressure of the compressor is insufficient, which will cause the compressor to fail.
3. The refrigerator does not cool, but the reasons why the compressor heats up are as follows: the high-pressure output buffer tube in the compressor is broken, or the screw fixing the tube is loose, resulting in the high-pressure pipe not exhausting and the low-pressure pipe not inhaling, so although the compressor is running, it does not cool. The solution to this situation is to cut the shell, replace the buffer tube, or tighten the screw.
4. There is a blockage in the circulation of the refrigeration system, resulting in the inability of the refrigerant to enter the evaporator to evaporate and absorb heat, resulting in the problem of heat when the refrigerator does not cool. It may also be caused by improper adjustment of the refrigerator temperature controller, or uneven internal convection and loose sealing of the refrigerator door.
5. It is normal for the compressor of the refrigerator to heat up. The reasons for the poor refrigeration effect are: the loss of refrigerant caused by the leakage of the refrigerator refrigeration system, the need to suppress the refrigeration system of the refrigerator, find the leakage point, make up for the leakage point, and fill the refrigerant in the air.
How to access protected trade databases-APP, download it now, new users will receive a novice gift pack.
Check whether the power socket is charged first to ensure that the plug is in good contact. Question. If there is a problem with the control circuit or the compressor itself, it is recommended to ask professional maintenance personnel to check and repair. Science popularization of relevant knowledge: If the refrigerator compressor does not work, the ambient temperature may be too low.
/Suggested solution: If it is found that the components of the compressor have been burned after professional inspection, it is necessary to repair and replace the components in time after disassembling the refrigerator, so that the compressor can return to normal operation, so as to solve the problem of not starting after power-on.
In this case, you need to find a special person to be responsible. Damage to the components of the refrigerator will often cause the engine in the refrigerator to not work or other effects. This requires a special person to repair it to ensure that there is no problem with the components that the main work of the refrigerator. If there is a problem, you can replace or replace a new refrigerator.
1. It may be because the temperature of the refrigerator is too high. When the temperature of the refrigerator exceeds the set temperature, the spring sheet on the thermostat will automatically bounce up to form a loop. In this case, it will also make a noise. Unplug the power supply, wait for the temperature to drop, and then put it into use again.
2. When the refrigerator starts, there should be a sound when the temperature control switch jumps to the connected position. In addition, the sound will be slightly louder when the compressor starts, which is normal. Don't worry.
3. If there is a banging sound in the refrigerator, and the sound is made in the running electric refrigerator compressor, which is the sound made by the spring in the compressor being broken or displaced, it should be repaired in time.
4. Reason 1: The temperature in the refrigerator is too high, resulting in fluorine leakage in the refrigeration system, that is, the refrigerator is not cooling because there is no refrigerant.Solution: Find a repairman, re-weld the pipe, and take the time to re-add refrigerant. Reason 2: Frosting in the evaporator.
5. The floor of the refrigerator is not flat or the placement is unstable, which is a common reason for the noise of the refrigerator. The huge sound of "boom", "giggle" and "tata", accompanied by obvious vibrations. When this kind of sound appears, users should pay special attention and should immediately find after-sales service for door-to-door repair.
1. The reason why the refrigerator does not cool: If it is not cool, there may be a problem with the refrigerator compressor. The compressor can start. When removing the return pipe and blocking the outlet with your finger, check how high the pressure is. If it is too low, then there is a problem with the compressor. The compressor cannot start. Check whether the refrigerator power supply is plugged in.
2. If the compressor can start normally, it is necessary to consider whether the refrigerant has been used up or the refrigerant has been leaked. It may be that the exhaust pressure of the compressor is insufficient, which will cause the compressor to fail.
3. The refrigerator does not cool, but the reasons why the compressor heats up are as follows: the high-pressure output buffer tube in the compressor is broken, or the screw fixing the tube is loose, resulting in the high-pressure pipe not exhausting and the low-pressure pipe not inhaling, so although the compressor is running, it does not cool. The solution to this situation is to cut the shell, replace the buffer tube, or tighten the screw.
4. There is a blockage in the circulation of the refrigeration system, resulting in the inability of the refrigerant to enter the evaporator to evaporate and absorb heat, resulting in the problem of heat when the refrigerator does not cool. It may also be caused by improper adjustment of the refrigerator temperature controller, or uneven internal convection and loose sealing of the refrigerator door.
5. It is normal for the compressor of the refrigerator to heat up. The reasons for the poor refrigeration effect are: the loss of refrigerant caused by the leakage of the refrigerator refrigeration system, the need to suppress the refrigeration system of the refrigerator, find the leakage point, make up for the leakage point, and fill the refrigerant in the air.
Trade data for regulatory compliance
author: 2024-12-23 22:32HS code compliance for Nordic countries
author: 2024-12-23 20:49Pharma excipients HS code classification
author: 2024-12-23 20:25Trade data integration with ERP systems
author: 2024-12-23 20:14Exotic textiles HS code classification
author: 2024-12-23 22:01Engine parts HS code verification
author: 2024-12-23 21:02Export quota monitoring software
author: 2024-12-23 20:52Global trade documentation templates
author: 2024-12-23 20:52368.23MB
Check966.29MB
Check221.31MB
Check197.98MB
Check568.77MB
Check582.34MB
Check396.21MB
Check412.27MB
Check615.71MB
Check776.84MB
Check241.95MB
Check429.97MB
Check549.96MB
Check745.96MB
Check898.13MB
Check495.81MB
Check554.92MB
Check178.49MB
Check191.99MB
Check411.17MB
Check429.34MB
Check137.58MB
Check582.88MB
Check151.46MB
Check852.72MB
Check415.82MB
Check977.45MB
Check351.73MB
Check752.65MB
Check718.57MB
Check839.31MB
Check437.85MB
Check626.95MB
Check687.26MB
Check626.37MB
Check122.98MB
CheckScan to install
How to access protected trade databases to discover more
Netizen comments More
2640 HS code mapping for infant formula imports
2024-12-23 22:19 recommend
1219 Global trade intelligence benchmarks
2024-12-23 21:58 recommend
843 How to reduce documentation errors
2024-12-23 21:23 recommend
948 Advanced import export metric tracking
2024-12-23 20:49 recommend
1453 Predictive trade infrastructure analysis
2024-12-23 20:18 recommend