1. Please check the emission system means that the engine's emission system is faulty; when our vehicle fails, these faults will form a series of codes. After the ECU reads the fault code, it will It is displayed on the electronic dashboard in the form of an indicator light.
2. It means that the emission system is faulty. It may be a failure of the fuel supply system, ignition system, etc., the engineOverheating and tempering, resulting in the sintering and peeling of the ternary catalytic converter carrier, and the increase of the exhaust resistance, etc. The specific reasons and solutions are as follows: Most of the fault light of the engine exhaust system is caused by the quality of the oil.
3. Checking the engine emission control system is a problem of the engine emission system. After a failure, the exhaust emissions of the car will increase, and the power performance of the engine will also decrease. The automobile exhaust system mainly discharges the exhaust gas discharged by the engine, and can also reduce the emission of pollutants and reduce the noise generated by the engine during operation.
The failure of the engine emission control system refers to the problem of the engine emission system. After a failure, the exhaust emissions of the car will increase, and the power performance of the engine will also decrease.The automobile exhaust system mainly discharges the exhaust gas of the engine, which can also reduce the emission of pollutants and reduce the noise generated by the engine during work.
The failure of the engine emission control system refers to the problem with the engine emission system. After the failure, the exhaust emissions of the car will increase and the power performance of the engine will also decrease.
The failure of the engine emission system indicates that the exhaust system has failed. It may be due to failures such as oil supply system and ignition system, overheating and temping of the engine, resulting in sintering and peeling of the ternary catalytic converter carrier, increasing exhaust resistance, etc. You can go to the 4S store for specific inspection.
The failure of the automobile emission system can be solved by restarting the car and then turning off the engine three times in a row, or unplugging the negative pole of the engine battery and waiting for 30 seconds before connecting it. The failure of the engine emission control system means that the engine exhaust system has failed.
The handling method is as follows: the fault light of the engine exhaust system is mostlyDue to the damage of the oxygen sensor in the ternary catalytic system or the poisoning of the ternary catalyst caused by the quality of domestic oil products, if the light turns on while driving, please slow down immediately and drive to the nearest maintenance service station for maintenance.
When the engine emission fault light is on, first of all, keep calm and don't panic. The following is my personal opinion on solving the problem of the engine emission fault light: First, observe the color and shape of the fault light. If the fault light is yellow and there is an exclamation mark, it usually means that the discharge system is faulty.
The internal fuel combustion of the engine is not good, and the high-quality smoke oil needs to be replaced and the throttle valve needs to be cleaned. The quality of the gasoline used is not good, and it is necessary to change the gas station to add fuel. The low-carbon on the top of the piston of the engine is cleaned up the carbon part.The oxygen sensor of the vehicle is faulty and needs to be replaced.
The failure of the engine exhaust system may be caused by damage to the oxygen sensor or the failure of the ternary catalyst. If it is caused by a ternary catalyst failure, only the ternary catalyst needs to be replaced. If it is caused by damage to the oxygen sensor, the oxygen sensor needs to be replaced. There is a ternary catalyst at the head of the exhaust pipe of the automobile engine, which is used to purify the exhaust gas.
Automated import export risk alerts-APP, download it now, new users will receive a novice gift pack.
1. Please check the emission system means that the engine's emission system is faulty; when our vehicle fails, these faults will form a series of codes. After the ECU reads the fault code, it will It is displayed on the electronic dashboard in the form of an indicator light.
2. It means that the emission system is faulty. It may be a failure of the fuel supply system, ignition system, etc., the engineOverheating and tempering, resulting in the sintering and peeling of the ternary catalytic converter carrier, and the increase of the exhaust resistance, etc. The specific reasons and solutions are as follows: Most of the fault light of the engine exhaust system is caused by the quality of the oil.
3. Checking the engine emission control system is a problem of the engine emission system. After a failure, the exhaust emissions of the car will increase, and the power performance of the engine will also decrease. The automobile exhaust system mainly discharges the exhaust gas discharged by the engine, and can also reduce the emission of pollutants and reduce the noise generated by the engine during operation.
The failure of the engine emission control system refers to the problem of the engine emission system. After a failure, the exhaust emissions of the car will increase, and the power performance of the engine will also decrease.The automobile exhaust system mainly discharges the exhaust gas of the engine, which can also reduce the emission of pollutants and reduce the noise generated by the engine during work.
The failure of the engine emission control system refers to the problem with the engine emission system. After the failure, the exhaust emissions of the car will increase and the power performance of the engine will also decrease.
The failure of the engine emission system indicates that the exhaust system has failed. It may be due to failures such as oil supply system and ignition system, overheating and temping of the engine, resulting in sintering and peeling of the ternary catalytic converter carrier, increasing exhaust resistance, etc. You can go to the 4S store for specific inspection.
The failure of the automobile emission system can be solved by restarting the car and then turning off the engine three times in a row, or unplugging the negative pole of the engine battery and waiting for 30 seconds before connecting it. The failure of the engine emission control system means that the engine exhaust system has failed.
The handling method is as follows: the fault light of the engine exhaust system is mostlyDue to the damage of the oxygen sensor in the ternary catalytic system or the poisoning of the ternary catalyst caused by the quality of domestic oil products, if the light turns on while driving, please slow down immediately and drive to the nearest maintenance service station for maintenance.
When the engine emission fault light is on, first of all, keep calm and don't panic. The following is my personal opinion on solving the problem of the engine emission fault light: First, observe the color and shape of the fault light. If the fault light is yellow and there is an exclamation mark, it usually means that the discharge system is faulty.
The internal fuel combustion of the engine is not good, and the high-quality smoke oil needs to be replaced and the throttle valve needs to be cleaned. The quality of the gasoline used is not good, and it is necessary to change the gas station to add fuel. The low-carbon on the top of the piston of the engine is cleaned up the carbon part.The oxygen sensor of the vehicle is faulty and needs to be replaced.
The failure of the engine exhaust system may be caused by damage to the oxygen sensor or the failure of the ternary catalyst. If it is caused by a ternary catalyst failure, only the ternary catalyst needs to be replaced. If it is caused by damage to the oxygen sensor, the oxygen sensor needs to be replaced. There is a ternary catalyst at the head of the exhaust pipe of the automobile engine, which is used to purify the exhaust gas.
HS code compliance for customs
author: 2024-12-24 01:47Global trade certificate verification
author: 2024-12-24 01:27How to ensure tariff compliance
author: 2024-12-24 01:10Predictive analytics in international trade
author: 2024-12-24 00:05How to meet import health standards
author: 2024-12-24 01:06How to integrate HS codes in ERP
author: 2024-12-23 23:38North American HS code tariff structures
author: 2024-12-23 23:31HS code-based insurance evaluations
author: 2024-12-23 23:09789.23MB
Check243.66MB
Check268.11MB
Check223.58MB
Check983.19MB
Check885.54MB
Check224.79MB
Check678.31MB
Check577.75MB
Check925.41MB
Check543.31MB
Check193.38MB
Check548.27MB
Check827.12MB
Check693.34MB
Check482.38MB
Check947.12MB
Check827.52MB
Check923.71MB
Check747.29MB
Check495.83MB
Check696.41MB
Check532.55MB
Check522.17MB
Check233.78MB
Check641.76MB
Check289.57MB
Check542.35MB
Check121.55MB
Check519.76MB
Check552.16MB
Check186.96MB
Check556.37MB
Check294.92MB
Check847.73MB
Check287.27MB
CheckScan to install
Automated import export risk alerts to discover more
Netizen comments More
2822 Dynamic commodity risk indexing
2024-12-24 01:18 recommend
1248 Electronics supply chain intelligence
2024-12-24 00:32 recommend
2624 Best platforms for international trade research
2024-12-24 00:11 recommend
193 How to calculate landed costs accurately
2024-12-23 23:33 recommend
89 How to comply with EU trade regulations
2024-12-23 23:14 recommend