[Answer]: I/0Control mode: program I/0 mode, interrupt drive 1/0 control mode, DMAI/0 control mode, 1/0 channel control mode.
This question examines the control mode of I/O equipment. There are 4 common I/O device control methods: program I/O, interrupt drive I/O, direct memory access I/O control, and I/O channel control.
There are four I/O control methods, namely: circular test I/O method (polling method); using I/O test instructions to test equipment. If the device is not busy, the input or output command will be executed; if the device is busy, the I/O test instruction will continue to test the device until the device is idle.
I/O channel control mode. Channel (CHannel) is also known as peripheral processor and input and output processor, which is relative to CPU. It is a processor. It can also execute instructions and procedures by instructions, but the instructions executed by the channel are instructions related to external devices.
1. io is divided into memory io, disk io and network io. It is generally considered to be the latter two. In order to reduce the number of io times, improve cache utilization, and protect kernel space, the operating system is empty Page cache 2) memory address register (MAR, memory address register) is designed in the room.
2. Mmap makes applications and operating systems shareKernel buffer, the application directly reads and writes on the kernel buffer without data copying. In the Linux system, the operation is replaced by calling mmap().
3. The computer system is hierarchical, which is composed of multi-level hierarchical structure. In terms of function, computer systems can be divided into five levels. The first level is the microprogram design level, also known as the hardware level; the second level is the general machine level, also known as the machine language level; and the third level is the operating system level, which is implemented by the operating system program.
4. When the process needs data, write the control words that allow startup and interruption to the device control status register, and start the device for input operation. (2) The process abandons the processor and waits for the completion of the input. The operating system process scheduler schedules other ready processes to occupy the processor.
1. I/O control methods mainly include program query method, interrupt method, DMA method and I/O channel Control method. The program query method is also known as the program polling method, which uses the user program to directly control the input/output operation between the host and the external device.
2. First, open the settings of vivo mobile phone.Secondly, click More Settings or More Security Settings. Finally, find the option about mobile phone or device manager in it, and click enter to view the device information of the machine.
3. I/O equipment is all input and output equipment that manages and controls computers. A large number of peripherals, that is, I/O devices, are configured in modern computer systems. According to their different working methods and classifications, character devices, also known as human-computer interaction devices.
1. The system of vivo mobile phones is FuntouchOS and OriginOs. FuntouchOS FuntouchOS is a smartphone operating system developed by vivo based on Android. Since its release in October 2013, it has always adhered to user experience as the core and "simplicity. Fun. The concept of "wisdom" is design-oriented.
2. vivo smartphones adopt the Funtouch OS system, which is deeply developed based on the Android system. The specific system version of vivo smartphone can be viewed by entering the mobile phone settings - more settings - about the mobile phone (some models also need to click the version information). Specific operation steps (take X9 as an example): Find the setting icon on the mobile phone desktop.
3. vivo system is an operating system developed by Chinese smartphone manufacturer vivo. It is a deeply customized version based on the Android operating system.The goal of the vivo system is to provide a smoother, more convenient and beautiful user experience, while ensuring the stability and security of the system.
Simply put, zero copy is a technology that prevents CPU from copying data from one fast storage to another.
The system I/O operation using DMA requires 4 context switches between kernel space and application space, 2 CPU data copies and 2 DMA data copies. The difference between Mmap memory mapping and standard I/O operation is that when the application needs to access data, there is no need to copy data between the kernel buffer and the application buffer.
Next, we use a very common application scenario of Java: sending files in the system to the remote end (the process involves: files on the disk - memory (byte array) - transmission to the user/network) to expand the traditional I/O operation in detail and realized through zero copy. I/O operation.
sendfile is only suitable for copying data from the file to the socket, limiting its scope of use. Linux introduced the splice system call in version 17, which is used to move data in two file descriptors.
For sendfile system calls with DMA copy collection function, the copy between kernel buffers can also be reduced again.
. ET200-SP is a multi-functional expansion module that can expand up to 7 modules to control the control system and DCS system. ET200-SP is an intelligent expansion module for 120, 300 and 1500 extensions.
Don't. Et200sp is a service module. When ordering, it comes with a base unit with the interface module. It is a set, so there is no need to order it separately. This product is mainly used in network construction and network connection, and is a terminal network server.
First of all, ET200SP is a distributed I/O system, while S7-200 is a classic stand-alone PLC. ET200SP CAN COMMUNICATE WITH THE MAIN CONTROL PLC THROUGH PROFINET OR PROFIBUS TO ACHIEVE DISTRIBUTED CONTROL.The S7-200 can only communicate with other devices through serial port or network communication.
ET200SP is a remote input/output module launched by Siemens, which can communicate with PLC through different communication interfaces. If the communication interface of ET200SP is replaced, it needs to be re-regured to ensure that the new communication interface can work properly.
et200sp version is different and the firmware needs to be updated. ET200SP is an on-site distributed I/O provided by Siemens, which can expand different submodules on ET200SP distributed I/O. After the firmware update of the I/O module, it is used for functional expansion to adapt to different versions.
The interface module is used to connect the distributed et200sp and the controller or dp master station, and realize data exchange with the io module through the backboard bus.Siemens et200mp is a scalable and highly flexible distributed io system used to connect process signals to the central controller through the fieldbus.
Trade data-driven logistics planning-APP, download it now, new users will receive a novice gift pack.
[Answer]: I/0Control mode: program I/0 mode, interrupt drive 1/0 control mode, DMAI/0 control mode, 1/0 channel control mode.
This question examines the control mode of I/O equipment. There are 4 common I/O device control methods: program I/O, interrupt drive I/O, direct memory access I/O control, and I/O channel control.
There are four I/O control methods, namely: circular test I/O method (polling method); using I/O test instructions to test equipment. If the device is not busy, the input or output command will be executed; if the device is busy, the I/O test instruction will continue to test the device until the device is idle.
I/O channel control mode. Channel (CHannel) is also known as peripheral processor and input and output processor, which is relative to CPU. It is a processor. It can also execute instructions and procedures by instructions, but the instructions executed by the channel are instructions related to external devices.
1. io is divided into memory io, disk io and network io. It is generally considered to be the latter two. In order to reduce the number of io times, improve cache utilization, and protect kernel space, the operating system is empty Page cache 2) memory address register (MAR, memory address register) is designed in the room.
2. Mmap makes applications and operating systems shareKernel buffer, the application directly reads and writes on the kernel buffer without data copying. In the Linux system, the operation is replaced by calling mmap().
3. The computer system is hierarchical, which is composed of multi-level hierarchical structure. In terms of function, computer systems can be divided into five levels. The first level is the microprogram design level, also known as the hardware level; the second level is the general machine level, also known as the machine language level; and the third level is the operating system level, which is implemented by the operating system program.
4. When the process needs data, write the control words that allow startup and interruption to the device control status register, and start the device for input operation. (2) The process abandons the processor and waits for the completion of the input. The operating system process scheduler schedules other ready processes to occupy the processor.
1. I/O control methods mainly include program query method, interrupt method, DMA method and I/O channel Control method. The program query method is also known as the program polling method, which uses the user program to directly control the input/output operation between the host and the external device.
2. First, open the settings of vivo mobile phone.Secondly, click More Settings or More Security Settings. Finally, find the option about mobile phone or device manager in it, and click enter to view the device information of the machine.
3. I/O equipment is all input and output equipment that manages and controls computers. A large number of peripherals, that is, I/O devices, are configured in modern computer systems. According to their different working methods and classifications, character devices, also known as human-computer interaction devices.
1. The system of vivo mobile phones is FuntouchOS and OriginOs. FuntouchOS FuntouchOS is a smartphone operating system developed by vivo based on Android. Since its release in October 2013, it has always adhered to user experience as the core and "simplicity. Fun. The concept of "wisdom" is design-oriented.
2. vivo smartphones adopt the Funtouch OS system, which is deeply developed based on the Android system. The specific system version of vivo smartphone can be viewed by entering the mobile phone settings - more settings - about the mobile phone (some models also need to click the version information). Specific operation steps (take X9 as an example): Find the setting icon on the mobile phone desktop.
3. vivo system is an operating system developed by Chinese smartphone manufacturer vivo. It is a deeply customized version based on the Android operating system.The goal of the vivo system is to provide a smoother, more convenient and beautiful user experience, while ensuring the stability and security of the system.
Simply put, zero copy is a technology that prevents CPU from copying data from one fast storage to another.
The system I/O operation using DMA requires 4 context switches between kernel space and application space, 2 CPU data copies and 2 DMA data copies. The difference between Mmap memory mapping and standard I/O operation is that when the application needs to access data, there is no need to copy data between the kernel buffer and the application buffer.
Next, we use a very common application scenario of Java: sending files in the system to the remote end (the process involves: files on the disk - memory (byte array) - transmission to the user/network) to expand the traditional I/O operation in detail and realized through zero copy. I/O operation.
sendfile is only suitable for copying data from the file to the socket, limiting its scope of use. Linux introduced the splice system call in version 17, which is used to move data in two file descriptors.
For sendfile system calls with DMA copy collection function, the copy between kernel buffers can also be reduced again.
. ET200-SP is a multi-functional expansion module that can expand up to 7 modules to control the control system and DCS system. ET200-SP is an intelligent expansion module for 120, 300 and 1500 extensions.
Don't. Et200sp is a service module. When ordering, it comes with a base unit with the interface module. It is a set, so there is no need to order it separately. This product is mainly used in network construction and network connection, and is a terminal network server.
First of all, ET200SP is a distributed I/O system, while S7-200 is a classic stand-alone PLC. ET200SP CAN COMMUNICATE WITH THE MAIN CONTROL PLC THROUGH PROFINET OR PROFIBUS TO ACHIEVE DISTRIBUTED CONTROL.The S7-200 can only communicate with other devices through serial port or network communication.
ET200SP is a remote input/output module launched by Siemens, which can communicate with PLC through different communication interfaces. If the communication interface of ET200SP is replaced, it needs to be re-regured to ensure that the new communication interface can work properly.
et200sp version is different and the firmware needs to be updated. ET200SP is an on-site distributed I/O provided by Siemens, which can expand different submodules on ET200SP distributed I/O. After the firmware update of the I/O module, it is used for functional expansion to adapt to different versions.
The interface module is used to connect the distributed et200sp and the controller or dp master station, and realize data exchange with the io module through the backboard bus.Siemens et200mp is a scalable and highly flexible distributed io system used to connect process signals to the central controller through the fieldbus.
Trade data for strategic sourcing
author: 2024-12-23 22:43Trade finance structuring by HS code
author: 2024-12-23 21:58HS code segmentation for industrial chemicals
author: 2024-12-23 21:28Industry consolidation via HS code data
author: 2024-12-23 20:47HS code-based customs valuation tools
author: 2024-12-23 20:23Niche pharmaceuticals HS code verification
author: 2024-12-23 21:51HS code-driven demand planning
author: 2024-12-23 21:08Petrochemicals HS code research
author: 2024-12-23 20:55End-to-end global logistics analytics
author: 2024-12-23 20:52How to use trade data for market expansion
author: 2024-12-23 20:20486.89MB
Check282.85MB
Check873.68MB
Check655.25MB
Check757.65MB
Check217.16MB
Check438.24MB
Check733.81MB
Check356.96MB
Check293.59MB
Check786.26MB
Check923.69MB
Check983.43MB
Check133.53MB
Check859.77MB
Check476.26MB
Check855.68MB
Check814.58MB
Check767.12MB
Check572.86MB
Check352.87MB
Check643.68MB
Check562.18MB
Check733.21MB
Check495.61MB
Check899.61MB
Check653.59MB
Check389.63MB
Check391.91MB
Check882.25MB
Check686.63MB
Check498.21MB
Check718.48MB
Check339.86MB
Check117.96MB
Check413.54MB
CheckScan to install
Trade data-driven logistics planning to discover more
Netizen comments More
1640 Global product lifecycle by HS code
2024-12-23 22:39 recommend
1268 Predictive analytics in international trade
2024-12-23 21:45 recommend
1317 HS code-based SLA tracking for vendors
2024-12-23 21:27 recommend
2757 Global trade supply chain modeling
2024-12-23 20:39 recommend
1047 Trade data-driven logistics planning
2024-12-23 20:19 recommend