The mixed gas is too thick: When the engine mixed gas is too thick, the phenomenon is: it is difficult to accelerate after starting, and the engine runs unevenly; the exhaust pipe smokes black smoke, and the engine is accompanied by a strange sound; the engine power decreases and the fuel consumption increases.Most of these are related to carbon accumulation, filter blockage, etc., and generally do not need to be overhauled.
When the vehicle starts, the valve will lack the sealing and lubrication of the oil, resulting in a sizzling sound. This is a normal situation. Second, the abnormal sound made by the belt when starting. In this case, it is necessary to check whether there is a problem with the belt in time. If there is an abnormal sound of the belt, first check.
The engine temperature is too low: When the car is cold started, the engine temperature is too low to work normally. At this time, it is normal to have some abnormal sounds. This situation is normal. Just wait for a while and wait for the engine temperature to rise to the normal level.
The abnormal noise during the cold start of the engine may be caused by engine oil dirt, improper oil viscosity, excessive engine carbon accumulation, carbon tank solenoid valve failure, secondary injection system failure, electric vacuum air pump, etc.
1. The engine claw pad is aging. The claw pad plays the role of supporting the engine. After aging, it will make a strange sound when the car starts.
2. There are many reasons for the abnormal sound when starting the car.Including low engine temperature, thermal expansion of automobile ternary catalyst, gearbox failure, engine belt or chain wear, etc.
3. There are many reasons for abnormal noise when the car starts, including low engine temperature, thermal expansion of the car's ternary catalyst, gearbox failure, engine belt or chain wear, etc. The engine temperature is too low: When the car is cold started, the engine temperature is too low to work normally. At this time, it is normal to have some abnormal noise.
4. The reasons for the abnormal sound of the car starting and the solution are as follows: there is a sharp chirping sound at the moment the car starts.
5. Once the fuel of the car is insufficient, the engine will make a rattling sound when it is ignited, but it will also occur that it cannot start normally. It must be checked.Whether the fuel is sufficient or not, this problem is very easy to solve. You only need to add fuel in time.
1. Try to check the coolant, the oil pressure is too high or too low, check the oil pressure gauge, and there may be a problem with the ignition time setting, which will also lead to such symptoms. As for others, it may be an internal problem with the engine, such as EGR valve blockage.
2. Caused by engine carbon accumulation, because the old engine oil is getting thinner and thinner, more and more carbon accumulates. When the oil is thin, it is easy to spee the oil, resulting in more and more carbon accumulation and loss of a lot of power. When replacing with new oil, the engine cannot adapt to the viscosity of the oil, which may increase the speed, resulting in loud engine noise.
3. The engine foot mat is aging, resulting in the inability to reduce the vibration. The engine and the frame are softly connected, and the foot mat is separated from the engine and the frame. Over time, the rubber rubber sleeve of the foot mat slowly ages and loses its original shock absorption effect, and the noise will naturally become louder. The design of the vehicle itself leads to loud noise.
HS code-based quota management-APP, download it now, new users will receive a novice gift pack.
The mixed gas is too thick: When the engine mixed gas is too thick, the phenomenon is: it is difficult to accelerate after starting, and the engine runs unevenly; the exhaust pipe smokes black smoke, and the engine is accompanied by a strange sound; the engine power decreases and the fuel consumption increases.Most of these are related to carbon accumulation, filter blockage, etc., and generally do not need to be overhauled.
When the vehicle starts, the valve will lack the sealing and lubrication of the oil, resulting in a sizzling sound. This is a normal situation. Second, the abnormal sound made by the belt when starting. In this case, it is necessary to check whether there is a problem with the belt in time. If there is an abnormal sound of the belt, first check.
The engine temperature is too low: When the car is cold started, the engine temperature is too low to work normally. At this time, it is normal to have some abnormal sounds. This situation is normal. Just wait for a while and wait for the engine temperature to rise to the normal level.
The abnormal noise during the cold start of the engine may be caused by engine oil dirt, improper oil viscosity, excessive engine carbon accumulation, carbon tank solenoid valve failure, secondary injection system failure, electric vacuum air pump, etc.
1. The engine claw pad is aging. The claw pad plays the role of supporting the engine. After aging, it will make a strange sound when the car starts.
2. There are many reasons for the abnormal sound when starting the car.Including low engine temperature, thermal expansion of automobile ternary catalyst, gearbox failure, engine belt or chain wear, etc.
3. There are many reasons for abnormal noise when the car starts, including low engine temperature, thermal expansion of the car's ternary catalyst, gearbox failure, engine belt or chain wear, etc. The engine temperature is too low: When the car is cold started, the engine temperature is too low to work normally. At this time, it is normal to have some abnormal noise.
4. The reasons for the abnormal sound of the car starting and the solution are as follows: there is a sharp chirping sound at the moment the car starts.
5. Once the fuel of the car is insufficient, the engine will make a rattling sound when it is ignited, but it will also occur that it cannot start normally. It must be checked.Whether the fuel is sufficient or not, this problem is very easy to solve. You only need to add fuel in time.
1. Try to check the coolant, the oil pressure is too high or too low, check the oil pressure gauge, and there may be a problem with the ignition time setting, which will also lead to such symptoms. As for others, it may be an internal problem with the engine, such as EGR valve blockage.
2. Caused by engine carbon accumulation, because the old engine oil is getting thinner and thinner, more and more carbon accumulates. When the oil is thin, it is easy to spee the oil, resulting in more and more carbon accumulation and loss of a lot of power. When replacing with new oil, the engine cannot adapt to the viscosity of the oil, which may increase the speed, resulting in loud engine noise.
3. The engine foot mat is aging, resulting in the inability to reduce the vibration. The engine and the frame are softly connected, and the foot mat is separated from the engine and the frame. Over time, the rubber rubber sleeve of the foot mat slowly ages and loses its original shock absorption effect, and the noise will naturally become louder. The design of the vehicle itself leads to loud noise.
International procurement intelligence
author: 2024-12-23 23:53Supplier compliance audit automation
author: 2024-12-23 23:32Trade data for strategic pricing
author: 2024-12-23 23:31Agriculture trade data by HS code
author: 2024-12-23 23:16Real-time supply chain event updates
author: 2024-12-24 01:45How to optimize packaging with trade data
author: 2024-12-24 01:25High-precision instruments HS code mapping
author: 2024-12-24 00:41Sustainable trade data analytics
author: 2024-12-23 23:53Trade data-driven LCL/FCL strategies
author: 2024-12-23 23:40235.46MB
Check734.13MB
Check319.83MB
Check433.78MB
Check755.68MB
Check987.97MB
Check158.21MB
Check515.43MB
Check187.76MB
Check834.74MB
Check193.17MB
Check971.62MB
Check444.99MB
Check211.37MB
Check177.32MB
Check452.76MB
Check541.76MB
Check335.12MB
Check287.14MB
Check917.21MB
Check178.54MB
Check957.76MB
Check239.85MB
Check419.35MB
Check784.56MB
Check669.57MB
Check133.31MB
Check151.88MB
Check475.23MB
Check412.78MB
Check911.72MB
Check746.43MB
Check958.48MB
Check572.97MB
Check866.33MB
Check141.53MB
CheckScan to install
HS code-based quota management to discover more
Netizen comments More
891 HS code-driven customs clearance SLAs
2024-12-24 01:07 recommend
2882 HS code compliance for African Union members
2024-12-24 00:47 recommend
447 Trade data for enterprise resource planning
2024-12-23 23:46 recommend
2706 Petroleum products HS code insights
2024-12-23 23:32 recommend
1097 Timber and wood products HS code trends
2024-12-23 23:28 recommend