1. The gas generator of the car airbag is nitrogen, and nitrogen will inflate the airbag within 0.1 seconds. There are substances such as sodium azide (NaN3) or ammonium nitrate (NH4NO3) in car airbags. When a car is hit violently at high speed, these substances will decompose quickly, producing a large amount of gas and filling the airbag.
2. The airbag gas generator is a device located in the airbag.Airbags are equipped with gas generators of different specifications. In the event of a vehicle collision, the gas generator inflates the airbag and unfolds it to protect the safety of passengers.
3. The airbag gas generator refers to a device that expands the airbag to protect the occupan before the occupan has a second collision in the event of a collision. The airbag, as an auxiliary device for the occupant restraint device in the seat, is called the Airbag Gas Generator System (SupplementalRestraintSystem, SRS).
4. The automobile airbag system is composed of collision sensor, control module (ECU), gas generator and airbag, etc. Airbag sensor: generally also known as collision sensor. According to different uses, collision sensors are divided into trigger collision sensors and protective collision sensors.
5. The working principle of the car airbag generator. The driver's airbag is stored in the steering wheel gasket. Therefore, when you see the words SRS or Airbag marked on the steering wheel, you can know that the car is equipped with airbags.
6. At present, gas generators mainly include compressed gas, fireworks and mixed gas. Airbag: It is generally made of polyamide fabric with good crack resistance, which is a semi-hard polymer material that can withstand greater pressure. After vulcanization, it can reduce the impact of airbag expansion.
Generally, this should be the left side airbag plug Caused by poor contact.It is recommended that you unplug the plug and plug it in, and use the decoder to clear the fault code. If it really doesn't work, you need to check the fault of the line.
The reason for the broken circuit or increased resistance of the Accord car airbag gas generator is: the situation caused by poor contact of the airbag plug.
If the generator is broken, then the pin of the generator is broken! If the whole circuit is broken or the resistance increases a lot, it is possible that there is a problem with the connector or the clock spring.
In this case, there are three possibilities: first, the airbag control unit fails, and it is possible to set any fault code. However, if the gas control unit is not submerged or disassembled, the chance of damage is very small.
If there is a problem with the main airbag or oil wire, it is recommended to find a professional to help you overhaul it.The car on Hongmei South Road in Minhang with Long 13-11 can be done. The places with AIR BAG on the car are all airbags.
There is a problem with one of the plugs of the main airbag or oil wire. The airbag computer board is generally in front of the gear lever or below the gear lever. The place with the AIR BAG in the car is the airbag.
1. Also, remember not to drive during drinking, and at the same time, you should correctly handle drunk driving, especially when the alcohol content is high or drunk or drunk. Don't drive the vehicle.
2. With the development of the automobile industry, airbags have almost become the standard for cars of various automobile manufacturers in recent years.It is equipped, but for this life-threatening widget, car owners seem to pay less attention to it.
3. Then the sitting posture. Generally speaking, drivers should not lean forward when driving. The sitting posture should be close to the seat, and the back seat should be adjusted to be able to control the car comfortably, so that there will be enough space for the airbag to fully play its protective role in the event of an accident.
4. Airbags are personal protection and safety technical measures. The airbag system is a passive safety protection system. When used with seat belts, it can provide effective collision protection for passengers. When a car collides, the car airbag can reduce the head injury rate by 25% and the facial injury rate by about 80%.
5. First of all, we should not knock or hit the part where the airbag is located at any time.
There are three types of airbag gas generators, which are divided into compressed gas type, pyrotic type and mixed type. They are made of polyphthalicamide fabric with good crack resistance. They are semi-hard polymer materials and can withstand great pressure.An airbag refers to a device that expands the airbag to protect the occupant in the event of a collision before the occupant has a second collision.
"Help" gas generator Some gas storage generators are combined with one or more igniters equipped with small gas pylerytors. The device heats the gas delivered to the gas generator and relies on the heating to increase the pressure of the gas in the airbag.
The automotive airbag system consists of a collision sensor, a control module (ECU), a gas generator and an airbag: 1. Airbag sensor: usually also called collision sensor. According to different uses, collision sensors are divided into trigger collision sensors and protective collision sensors.
At present, there are three main types of gas generators: compressed gas, fireworks and hybrid. Airbag: It is generally made of polyamide fabric with good anti-cracking performance. It is a semi-hard polymer material that can withstand greater pressure;After vulcanization, it can reduce the impact force when the airbag expands.
The safety performance of cars is for different protection purposes. There are many types, generally including side airbags, head airbags and knee airbags. There are very big differences between these three types.
Nitrogen. The gas generator of the car airbag is nitrogen, which will inflate the airbag in 0.1 seconds. An airbag is an elastic capsule, a medium filled with compressed air or water in a flexible rubber capsule.
Trade intelligence for aerospace industry-APP, download it now, new users will receive a novice gift pack.
1. The gas generator of the car airbag is nitrogen, and nitrogen will inflate the airbag within 0.1 seconds. There are substances such as sodium azide (NaN3) or ammonium nitrate (NH4NO3) in car airbags. When a car is hit violently at high speed, these substances will decompose quickly, producing a large amount of gas and filling the airbag.
2. The airbag gas generator is a device located in the airbag.Airbags are equipped with gas generators of different specifications. In the event of a vehicle collision, the gas generator inflates the airbag and unfolds it to protect the safety of passengers.
3. The airbag gas generator refers to a device that expands the airbag to protect the occupan before the occupan has a second collision in the event of a collision. The airbag, as an auxiliary device for the occupant restraint device in the seat, is called the Airbag Gas Generator System (SupplementalRestraintSystem, SRS).
4. The automobile airbag system is composed of collision sensor, control module (ECU), gas generator and airbag, etc. Airbag sensor: generally also known as collision sensor. According to different uses, collision sensors are divided into trigger collision sensors and protective collision sensors.
5. The working principle of the car airbag generator. The driver's airbag is stored in the steering wheel gasket. Therefore, when you see the words SRS or Airbag marked on the steering wheel, you can know that the car is equipped with airbags.
6. At present, gas generators mainly include compressed gas, fireworks and mixed gas. Airbag: It is generally made of polyamide fabric with good crack resistance, which is a semi-hard polymer material that can withstand greater pressure. After vulcanization, it can reduce the impact of airbag expansion.
Generally, this should be the left side airbag plug Caused by poor contact.It is recommended that you unplug the plug and plug it in, and use the decoder to clear the fault code. If it really doesn't work, you need to check the fault of the line.
The reason for the broken circuit or increased resistance of the Accord car airbag gas generator is: the situation caused by poor contact of the airbag plug.
If the generator is broken, then the pin of the generator is broken! If the whole circuit is broken or the resistance increases a lot, it is possible that there is a problem with the connector or the clock spring.
In this case, there are three possibilities: first, the airbag control unit fails, and it is possible to set any fault code. However, if the gas control unit is not submerged or disassembled, the chance of damage is very small.
If there is a problem with the main airbag or oil wire, it is recommended to find a professional to help you overhaul it.The car on Hongmei South Road in Minhang with Long 13-11 can be done. The places with AIR BAG on the car are all airbags.
There is a problem with one of the plugs of the main airbag or oil wire. The airbag computer board is generally in front of the gear lever or below the gear lever. The place with the AIR BAG in the car is the airbag.
1. Also, remember not to drive during drinking, and at the same time, you should correctly handle drunk driving, especially when the alcohol content is high or drunk or drunk. Don't drive the vehicle.
2. With the development of the automobile industry, airbags have almost become the standard for cars of various automobile manufacturers in recent years.It is equipped, but for this life-threatening widget, car owners seem to pay less attention to it.
3. Then the sitting posture. Generally speaking, drivers should not lean forward when driving. The sitting posture should be close to the seat, and the back seat should be adjusted to be able to control the car comfortably, so that there will be enough space for the airbag to fully play its protective role in the event of an accident.
4. Airbags are personal protection and safety technical measures. The airbag system is a passive safety protection system. When used with seat belts, it can provide effective collision protection for passengers. When a car collides, the car airbag can reduce the head injury rate by 25% and the facial injury rate by about 80%.
5. First of all, we should not knock or hit the part where the airbag is located at any time.
There are three types of airbag gas generators, which are divided into compressed gas type, pyrotic type and mixed type. They are made of polyphthalicamide fabric with good crack resistance. They are semi-hard polymer materials and can withstand great pressure.An airbag refers to a device that expands the airbag to protect the occupant in the event of a collision before the occupant has a second collision.
"Help" gas generator Some gas storage generators are combined with one or more igniters equipped with small gas pylerytors. The device heats the gas delivered to the gas generator and relies on the heating to increase the pressure of the gas in the airbag.
The automotive airbag system consists of a collision sensor, a control module (ECU), a gas generator and an airbag: 1. Airbag sensor: usually also called collision sensor. According to different uses, collision sensors are divided into trigger collision sensors and protective collision sensors.
At present, there are three main types of gas generators: compressed gas, fireworks and hybrid. Airbag: It is generally made of polyamide fabric with good anti-cracking performance. It is a semi-hard polymer material that can withstand greater pressure;After vulcanization, it can reduce the impact force when the airbag expands.
The safety performance of cars is for different protection purposes. There are many types, generally including side airbags, head airbags and knee airbags. There are very big differences between these three types.
Nitrogen. The gas generator of the car airbag is nitrogen, which will inflate the airbag in 0.1 seconds. An airbag is an elastic capsule, a medium filled with compressed air or water in a flexible rubber capsule.
Trade data-driven investment strategies
author: 2024-12-24 01:31Leveraging global trade statistics
author: 2024-12-24 00:53Country-specific HS code duty reclaims
author: 2024-12-24 00:29Global trade resource libraries
author: 2024-12-23 23:56How to access historical shipment records
author: 2024-12-23 23:54Trade data for intellectual property checks
author: 2024-12-24 01:47India HS code-based product analysis
author: 2024-12-24 01:33How to analyze competitor shipping routes
author: 2024-12-24 00:24Advanced shipment lead time analysis
author: 2024-12-23 23:47166.13MB
Check737.44MB
Check473.17MB
Check422.38MB
Check569.94MB
Check626.78MB
Check172.98MB
Check945.35MB
Check149.57MB
Check944.96MB
Check924.64MB
Check184.66MB
Check581.84MB
Check556.88MB
Check633.25MB
Check246.92MB
Check388.91MB
Check237.51MB
Check816.49MB
Check758.23MB
Check821.81MB
Check828.19MB
Check662.84MB
Check633.47MB
Check384.92MB
Check114.53MB
Check437.19MB
Check417.66MB
Check331.98MB
Check749.21MB
Check217.24MB
Check652.17MB
Check396.26MB
Check586.43MB
Check486.78MB
Check181.81MB
CheckScan to install
Trade intelligence for aerospace industry to discover more
Netizen comments More
821 Customs broker performance analysis
2024-12-24 01:51 recommend
157 HS code mapping for re-importation
2024-12-24 01:47 recommend
1191 How to integrate HS codes into BOMs
2024-12-24 01:42 recommend
1640 Global sourcing risk by HS code
2024-12-24 00:22 recommend
570 HS code-based value chain optimization
2024-12-24 00:00 recommend